You are here: Forks > 36 mm > Using the 36 Quick-Release Lever
Using the Quick-Release Lever
- Before installing
wheel, check that quick-release levers are in the open position (step 1). Place the wheel into the dropouts of the fork, and slide
the axle in through the fork and through the hub (step 2).
![](../../step1.jpg)
- Thread the axle in until hand tight.
![](../../step2.jpg)
- Fold the axle lever into its closed position and push until it clicks into place.
![](../../step3.jpg)
- Compress the fork a few times to ensure that the lower leg is settled into its lowest
friction point on the axle.
- Close both QR Levers so the backside of each lever contacts its lower leg.
![](../../step4.jpg)
Bushing
Technology & Inspection | Control
Direction | Oil Volumes | Structural
Inspection | Dropout Thickness Inspection | Torque Values | Unit
Conversion | Suspension Tuning Tips | Using
the Pump | Important Safety Information | Service Intervals | Contact FOX Service | Warranty Information | FOXHelp Service Web Site
Copyright © 2012
FOX Factory Inc.